Frequently Asked Questions

How does it work?

1. Pull the rip cord to unlock from the riding position.
2. Rotate your foot as you release the rip cord.
3. Rotate foot to forward position for easy paddling or lift riding.
4. When ready to ride, rotate foot back to riding position - Rotator will automatically lock into riding position.
5. Ride!

How does the Rotator mount to a snowboard?

The Rotator screws into the existing mounting holes in every standard snowboard. The binding is then screwed directly to the Rotator using the existing binding hardware. Hardware for mounting the Rotator to the board is included.

Top benefits of the Rotator?

1. Easy and comfortable paddling on flat ground.
2. Comfortable and convenient for lift loading and riding.
3. Eliminates twisted ankle tension during lift rides.
4. Eliminates need to support board with other foot during lift rides.
5. Eliminates the snowboarder from always needed to be on a particular side of the lift and in line because it interferes with other boarders and skiers.
6. Quality, low cost product.
7. Tested and proven to be reliable and safe.
8. Lightweight.
9. Installs on any standard adult snowboard/binding in 5 minutes or less.
10. Leading foot raised slightly off board provides more leverage for carving and minimizes toe and heel drag.
11. Easy-to-grab rip cord for rotation release.
12. Automatic riding position lock.
13. Lifetime warrantee on broken parts.
14. Stomp plate available for trailing foot.

How is the Rotator different from other such devices?

The rotator is a sleek, simple design that actually works. The Rotator uses design simplicity and strong materials to deliver an affordable product that meets the need. This is a serious piece of hardware....it will not break!

Does the rotator raise your foot off the board?

Yes, the Rotator is .5 inches thick and raises the boot and binding off the board. The height difference between the front and rear leg is unnoticeable, considering you are mostly pointed down hill anyway. The increased height provides the added benefit of increased leverage for carving and reduces toe and heel drag.

Can the rotator be used in Regular or Goofy stance?

Yes, the rotator can be mounted in either stance depending on your preference.

How heavy is the Rotator?

The rotator adds a little over a pound of weight to your board when installed. The weight increase is unnoticeable and well worth the trade-off in versatility and comfort.

Does the Rotator mount to 3-hole boards and bindings?

The 3-hole Rotator is available from our website.

How well does it perform in extreme weather conditions?

The Rotator has been tested in all winter conditions in Europe and the US from -20 degrees F to warm, slushy days of spring riding. The Rotator works every time!

What is it made of?

The Rotator is constructed of a high-density polymer material for strength and smooth movement during rotation.

How tough and reliable is it?

The rotator was designed and built for toughness and simplicity. The fact there are few moving parts makes it more reliable. It has been tested under intense riding and high-impact conditions and has never failed. The strong materials selected for its construction are durable and ensure it will provide years of dedicated service.

How can I get one?

Visit our web store at www.the-rotator.com or watch for us on a mountain near you.